Measuring voltage transformers DNT SO are designed to transmit measurement information signals to measuring instruments, protective devices, automation, signaling and control in voltage networks from 3.3 to 42 kV AC, industrial frequency 50 or 60 Hz.
Measuring voltage transformers (VT) of the DNT SO series are designed for indoor installation.
According to the principle of operation, they are inductive, single-phase, two-pole, ungrounded. Voltage transformers (VT) have a cast housing made on the basis of an epoxy compound. The insulation material of voltage transformers has excellent arc, ozone and ultraviolet protection characteristics, while it has high mechanical strength, so that the transformers can work for more than 30 years without any maintenance.
A feature of these transformers is the presence of fuses in the design to protect transformers from high currents. The fuses can be positioned vertically, in which case the marking will be DNT SOV, or horizontally, in which case the marking will be DNT SOH.
Additionally, measuring voltage transformers, at the request of the customer, can be equipped with a ferroresonance protection device.
MAIN SPECIFICATIONS
ADVANTAGES OF CAST RESIN VOLTAGE INSTRUMENT TRANSFORMERS
Voltage transformers (VT) of the DNT SO series were developed for operation at transformer substations, at traction substations of railways, at hard-to-reach facilities where equipment maintenance is not required, at enterprises with high pollution of electrical equipment. These transformers are widely used as auxiliary transformers (TSN) with a power of up to 5 kVA, for powering relay protection terminals, circuit breaker drives, disconnectors and other consumers.
Transformers meet the requirements of IEC, ANSI, IEEE, GOST standards.
Measuring voltage transformers DNT SO are a good alternative to obsolete and obsolete current transformers with oil insulation.
